Ask Accessa for the right primer for your job.
NCP’s DynaMatch™ 1-Pack Wash Primer – N-4718
A non-acidic, chromate-free, single-component wash primer, metal pretreatment. Promotes adhesion of primers and topcoats to various metal surfaces.
NCP’s DynaMatch™ Gray Universal Primer – N-1796 Gray; N-7293 White
An excellent corrosion inhibiting, fast curing primer. Re-coatable with most systems. May be used as a barrier coat.
NCP’s DynaMatch™ Gray Utility Primer – N-6469
This is a low VOC air dry utility primer designed for use as a general purpose interior and exterior primer for application to steel. Ideally suited to the structural steel market.
NCP’s DynaMatch™ HS Buff Universal Primer – N-4033W
An excellent corrosion inhibiting, fast curing, high solids universal primer. Re-coatable with most systems. May be used as a barrier coat over existing systems if required.
NCP’s DynaMatch™ White Polyamide Epoxy Primer – N-1088A
A two-component, corrosion-inhibiting, polyamide epoxy primer suited for high performance application. Lead and chrome free.
NCP’s DynaSpec Primer – N-1981A&B
A two-component, 3.5 VOC, corrosion-inhibiting, polyamide epoxy primer suited for high performance application. Lead and chrome free.
NCP’s DynaSpec HS Primer – N-3580A&B
A two-component, corrosion-inhibiting, polyamide epoxy primer suited for high performance application. Lead and chrome free, 2.8 lb./gal. VOC, CARC System.
NCP’s DynaPoxy 441 – N-6239A&B
A two-component, corrosion-inhibiting, polyamide epoxy coating designed to protect metal and plastic surfaces from environmental attack.
NCP’s DynaMatch™ Gray Primer Sealer – N-7550A
A two-component polyurethane primer sealer designed for use on metal, wood, and plastics.
NCP’s DynaMatch™ Gray High Solids Primer Sealer – N-7560A&B
A two-component polyurethane coating for use as a primer or sealer on metal, wood, and plastics. This product features an excellent wet-on-wet recoatibility with polyurethane topcoats and complies with 3.5 lb./gal. solvent emissions.
NCP’s DynaMatch™ Moisture Cure Zinc Rich Primer – N-5751M2
Where extreme corrosion resistance is required; 1st coat in enhanced corrosion system.
NCP’s DynaZinc Gray Epoxy Primer – N-8093A&B
A two-component, zinc rich, corrosion inhibiting polyamide epoxy primer. Suited for high performance applications. Lead and chrome free.
PPG”s Spectracron 560 Wet-On-Wet Epoxy Primer – QAP560
Spectracron 560 Wet-On-Wet Epoxy Primer from PPG has the ability to increase shop throughput when used in a wet-on-wet application with one of the Spectracron 2K Polyurethane enamels.