HitSol HSC127 – HitSol HSC127 is a concentrated, water-dilutable metal cleaner that is effective on a wide variety of soils. It is excellent for use in recirculating spray washers or in immersion tanks. HitSol HSC127 provides rust protection for iron and steel. It quickly removes lubricants, shop soils, and grease. Oils separate from the cleaning solution for easy removal at the surface. It may etch aluminum and copper alloys under some conditions. HitSol HSC127 is safe to use on iron, steel, stainless steel, rubber, and plastic.
HitSol HSC104 – HitSol HSC104 is a heavy-duty, water dilutable cleaning compound that is effective on petroleum soils and adhesives. It is designed for use by hand for tough applications or for floor cleaning with automatic floor scrubbers. HitSol HSC104 can also be used in pressrooms to remove aqueous inks and coatings. HitSol HSC104 is easy to use and has a pleasant scent. HitSol HSC104 quickly dissolves soils and leaves surfaces residue free. The moderate pH makes it mild to the skin and sensitive substrates, such as coatings and metals.
HitSol HSC105 – A low foam, water dilutable metal cleaner that is designed for use in recirculating spray washers. HitSol HSC105 will quickly remove machining lubricants, shop soils, and grease. Petroleum soils will separate from the cleaning solution for easy removal at the surface. HitSol HSC105 is mild to the skin and should conform with the wastewater discharge requirements of most municipalities.
HitSol HSC115 – A concentrated, low foam metal cleaner with built-in rust protection. HitSol HSC115 will quickly remove machining lubriants, shop soils, and grease. The film left on un-rinsed ferrous metal parts will protect against rust during indoor storage. Petroleum soils will separate from the cleaning solution for easy removal at the surface. HitSolHSC115 is mild to the skin and conforms with the discharge requirements of most municipalities. The low foaming characteristics make HitSol HSC115 appropriate for use in re-circulating spray washers or in immersion tanks.
HitSol HSC118 – HitSol HSC118 is a water-based, low VOC cleaning fluid designed for hand wipe cleaning of hard surfaces. HitSol HSC118 is intended to replace cleaning and degreasing materials such as mineral spirits and chlorinated solvents where thorough cleaning, fast dry and minimal residue are required. With HitSol HSC118 oils, inks and light soils are quickly removed. HitSol HSC118 contains no alkalies or heavy metals. The odor is pleasant and HitSol HSC118 is mild to the skin.
HitSol HSC164 – A concentrated, water dilutable degreaser that is effective on a wide variety of soils. It can be used in both process and maintenance cleaning. HitSol HSC164 is recommended for use in floor scrubbers, mop buckets, and for high-pressure washers to remove oils, grease, dirt, and other shop soils.
HitSol HSC187 – A low foam, water dilutable metal cleaner. HitSol HSC187 will remove stubborn machining lubricants, shop soils, and grease. Petroleum soils separate from HSC187 solution for easy removal at the surface. The low foam characteristics make HSC187 appropriate for use in both re-circulating spray washers and immersion tanks.
HitSol HSC189V – A low foam, water dilutable metal cleaner with built-in rust protection. HitSol HSC189V will quickly remove machining lubricants, shop soils, and grease. The film left on un-rinsed metal parts will protect against rust during indoor storage. Petroleum soils will separate from the cleaning solution for easy removal at the surface. The low foaming characteristics make HitSol HSC189V appropriate for use in re-circulating spray washers or in immersion tanks.
HitSol HSC918 – HitSol HSC918 is an economical, water dilutable cleaning compound that is effective on inks, grease, and oils. It is designed for floor scrubbers. HitSol HSC918 can be used in pressrooms to remove aqueous inks and coatings. It can also be used for industrial maintenance cleaning. HitSol HSC918 is easy to use and has a pleasant scent. HitSol HSC918 quickly dissolves soils and leaves surfaces residue free. The moderate pH makes it mild to the skin and sensitive substrates, such as coatings and metals.
HitSol HSC4849 – HitSol HSC4849 is a medium-duty, low-foam, silicate-free, water-dilutable multi-metal cleaner. HitSol HSC4849 will quickly remove machining lubricants, shop soils, and grease. Petroleum soils will separate from the cleaning solution for easy removal at the surface. The low foaming characteristics make HitSol HSC4849 appropriate for use in recirculating spray washers or in immersion tanks.
Henkel Bonderite C-AK NP-1 – Alkaline-based, liquid multi-metal pretreatment cleaner intended for use in general metal pretreatment lines. Also for use in municipal water treatment systems that have strict regulations on phosphate discharge and water quality. Offers excellent cleaning on cold-rolled steel, hot-rolled steel, aluminum, galvanized metals, and other materials.
Henkel Parco Cleaner 305 – Designed to prepare aluminum, steel, hot-dip galvanized, and electrogalvanized steel surfaces.
Henkel Parco Cleaner 319MM – Designed to prepare aluminum, steel, electrogalvanized, and hot-dip galvanized surfaces to receive a conversion coating or prior to a plating operation.3
Henkel Parco Cleaner 2087X – Liquid cleaner formulated for the removal of lubricants and other drawing compounds or oils.
Henkel Parco Cleaner ZX-1 – Designed to prepare aluminum, steel, electrogalvanized, and hot-dip galvanized surfaces to receive a conversion coating or prior to a plating operation, primarily for use in spray systems.
Henkel Parco Cleaner ZX-3 – Designed to prepare ferrous surfaces to receive a conversion coating. Can be used to strip phosphate and lubed parts prior to a coating, plating, or machining operation.
Henkel Parco Cleaner ZX-4 – A non-silicated, heavy duty, liquid, spray alkaline cleaner designed for cleaning ferrous metals.
Henkel Ridoline 412 – A concentrated, liquid, silicate-free, mildly alkaline cleaner designed to remove oils and light-oxide films from aluminum and its alloys.
PPG Ultrax 29 – A low silicate liquid alkaline cleaner developed for use in multi-metal cleaning systems. The low silicate level reduces the effect of “silicate dry-on” during line stoppage or long delays between processing stages.
PPG ChemKleen 163 – A liquid, biodegradable alkaline cleaner specifically formulated to prepare metal surfaces to receive a uniform and dense phosphate coating.