Full line of cleaners including: paint strippers, system cleaners, floor soaps and cleaners, and equipment cleaners. Specially formulated, environmentally-safe products to clean production paint applicators and equipment.
HitSol HSC104 – HitSol HSC104 is a heavy-duty, water dilutable cleaning compound that is effective on petroleum soils and adhesives. It is designed for use by hand for tough applications or for floor cleaning with automatic floor scrubbers. HitSol HSC104 can also be used in pressrooms to remove aqueous inks and coatings. HitSol HSC104 is easy to use and has a pleasant scent. HitSol HSC104 quickly dissolves soils and leaves surfaces residue free. The moderate pH makes it mild to the skin and sensitive substrates, such as coatings and metals.
HitSol HSC105 – A low foam, water dilutable metal cleaner that is designed for use in recirculating spray washers. HitSol HSC105 will quickly remove machining lubricants, shop soils, and grease. Petroleum soils will separate from the cleaning solution for easy removal at the surface. HitSol HSC105 is mild to the skin and should conform with the wastewater discharge requirements of most municipalities.
HitSol HSC118 – HitSol HSC118 is a water-based, low VOC cleaning fluid designed for hand wipe cleaning of hard surfaces. HitSol HSC118 is intended to replace cleaning and degreasing materials such as mineral spirits and chlorinated solvents where thorough cleaning, fast dry and minimal residue are required. With HitSol HSC118 oils, inks and light soils are quickly removed. HitSol HSC118 contains no alkalies or heavy metals. The odor is pleasant and HitSol HSC118 is mild to the skin.
HitSol HSC829 – A highly aggressive, water-based coatings remover. It is designed for use on wet paints, primers, powder coatings, and on some inks. HitSol HSC829 will soften and remove coatings from ferrous metals and from many plastics when used in a heated soak tank.
HitSol HSC918 – HitSol HSC918 is an economical, water dilutable cleaning compound that is effective on inks, grease, and oils. It is designed for floor scrubbers. HitSol HSC918 can be used in pressrooms to remove aqueous inks and coatings. It can also be used for industrial maintenance cleaning. HitSol HSC918 is easy to use and has a pleasant scent. HitSol HSC918 quickly dissolves soils and leaves surfaces residue free. The moderate pH makes it mild to the skin and sensitive substrates, such as coatings and metals.
HitSol HSC1555 – HitSol HSC1555 is a non-chlorinated, non-flammable product that will soften and aid in the removal of liquid and powder acrylic, enamel, and urethane coatings. HitSol HSC1555 is non-corrosive and safe to use on most metals including steel, stainless steel, and aluminum.
HitSol HSC4142 – Certified by NSF, HitSol HSC4142 is a highly concentrated cleaning compound acceptable for use as a general cleaner on all surfaces in and around food processing areas where its use is not intended for direct food contact.
HitSol Rust Stripper HSRS4200 – HitSol Rust Stripper is a highly aggressive, water-based rust stripper. It is designed for use on ferrous substrates to quickly remove oxidation.
Henkel P3 116 Saf-T-Clean – A low-foaming, low-VOC paint remover for removal of paints and other soils from the floor in the spray booth area of manufacturing facilities. This stripper does not contain chlorinated solvent or napthalene.
Henkel P3 104 Saf-T-Clean – A low-odor blended solvent for removal of paints and other soils from the floor in the spray booth area of manufacturing facilities.
Henkel Parco 2280 Clean-Up – A liquid cleaner with a mild, pleasant aroma, formulated to meet the properties required by automotive and other general industrial maintenance cleaning needs.
Henkel P3 222 RIK – A slightly alkaline liquid product expressly formulated for the cleaning of dirty floors. It is used, after dilution with water, with machine floor scrubbers or mop and bucket.
Henkel P3 2226 Maintenance Cleaner (Neutral Cleaner) – A liquid cleaner for the removal of soils from floors, walls, windows, machinery, and other hard surfaces. It is designed to leave no visible residue if a water rinse does not follow the cleaning operation.
Henkel P3 2250UF E-Coat Cleaner – A low-VOC, HAPs-free, water-based concentrated cleaner designed for use on ultra filtration or spray wash systems to remove E-coat buildup. The product has been formulated to minimize foaming while effectively removing uncured cathodic E-coat buildup.
Henkel P3 2227A Oven Cleaner – Formulated for removal of E-coat, primer and topcoat resins, plasticizers and other charred, hard-crusted soils found in the ovens of automotive and general industrial plants.
Henkel P3 Parcosol 577WB – HAPs-free, low VOC, water-soluble, proprietary activator/amine purge blend used for internal and external cleaning of waterborne paint application equipment. This product is specifically formulated to work more effectively at removing wet, semi-dry, and dry waterborne paint from bell or air-atomized paint delivery equipment.
Henkel P3 Paint Line Cleaner 200WB – A non-methylene chloride, alkaline, zero-VOC based, non-combustible product used for internal cleaning of re-ciruculating paint lines for waterborne and solventborne paint systems. This product was specially developed to be compatible with all types of Viton seals.
PPG Corrosol 52921 – One of the finest liquid alkaline descalers on the market. It contains an improved surfactant package.
PPG Corrosol 52961 – An effective soil and laser scale remover at low use levels. Spray or immersion applications.
PPG Corrosol 52962 – A mildly acidic cleaner and rinse additive designed to remove light oxides from ferrous metal surfaces.
PPG Heat Exchanger Cleaner – A liquid phosphoric acid base material which readily dissolves sludge that builds-up in Plate & Frame Heat Exchangers. It is compatible with zinc phosphate materials and is not deleterious to equipment and less hazardous than hydrochloric acid-based materials.
PPG Ovekleen 37 – A concentrated alkaline oven cleaner and degreaser extremely useful for dissolving carbon and baked-on E-coat paint residue. Ovenkleen 37 is specially formulated to be non-aggressive on aluminum alloys thus making it suitable for all oven cleaning applications.